PRT Gwryw Rhedeg Tee Plastig Poly Gwthio Mewn Tiwb i Ffitiadau Connector Adapter Pibell
| MODEL | *A | B | C | D | E | F | H1(Hecs) | Pwysau(g) |
| PRT04-M5 | 4 | M5*0 8d | 4 | 21 | 18 | 10 | 10.1 | |
| PRT04-M6 | 4 | M6*1.0c | 4.5 | 21 | 18 | 10 | 10.2 | |
| PRT04-01 | 4 | R1/8 | 7.5 | 22.9 | 18 | 10 | 10.1 | |
| PRT04-02 | 4 | R1/4 | 9 | 24.4 | 18 | 14 | 14.1 | |
| PRT06-M5 | 6 | M5″0.8p | 4 | 24 | 19.9 | 12 | 14.7 | |
| PRT06-M6 | 6 | M6*1.0c | 4.5 | 24.5 | 19.9 | 12 | 14.6 | |
| PRT06-01 | 6 | R1/8 | 7.5 | 25.4 | 19.9 | 12 | 15.1 | |
| PRT06-02 | 6 | R1/4 | 9 | 26.9 | 19.9 | 14 | 18 | |
| PRT06-03 | 6 | R3/8 | 10.5 | 28.4 | 19.9 | 17 | 22.9 | |
| PRT06-04 | 6 | R1/2 | 12 | 29.9 | 19.9 | 21 | 30.3 | |
| PRT08-01 | 8 | R1/8 | 7.5 | 26 | 22.9 | 14 | 19.2 | |
| PRT08-02 | 8 | R1/4 | 9 | 27.5 | 22.9 | 14 | 19.9 | |
| PRT08-03 | 8 | R3/8 | 10.5 | 29 | 22.9 | 17 | 25.4 | |
| PRT08-04 | 8 | R1/2 | 12 | 30.5 | 22.9 | 21 | 32.9 | |
| PRT10-01 | 10 | R1/8 | 7.5 | 29 | 27.2 | 17 | 30.2 | |
| PRT10-02 | 10 | R1/4 | 9 | 30.5 | 27.2 | 17 | 31 | |
| PRT10-03 | 10 | R3/8 | 10.5 | 32 | 27.2 | 17 | 35 | |
| PRT10-04 | 10 | R1/2 | 12 | 33.5 | 27.2 | 21 | 42.2 | |
| PRT12-01 | 12 | R1/8 | 7.5 | 31 | 29.2 | 19 | 38.6 | |
| PRT12-02 | 12 | R1/4 | 9 | 32.5 | 29.2 | 19 | 40.6 | |
| PRT12-03 | 12 | R3/8 | 10.5 | 34 | 29.2 | 19 | 42.6 | |
| PRT12-04 | 12 | R1/2 | 12 | 25.2 | 31.5 | 21 | 48.1 | |
| PRT14-03 | 14 | R3/8 | 10.5 | 40.7 | 31 | 21 | 61.9 | |
| PRT14-04 | 14 | R1/2 | 12 | 42.2 | 31 | 21 | 65.9 | |
| PRT16-03 | 16 | R3/8 | 10.5 | 41.5 | 32.5 | 24 | 74.5 | |
| PRT16-04 | 16 | R1/2 | 12 | 43.2 | 32.5 | 24 | 66.1 |
YCHWANEGU O-ring
| MODEL | A | B | C | D | E | F | H1(Hecs) | Pwysau(g) |
| PRT04-G1 | 4 | G1/8 | 5.5 | 22.2 | 18 | 14 | 12 | 12.3 |
| PRT04-G2 | 4 | G1/4 | 6 | 22.6 | 18 | 17 | 14 | 17 |
| PRT06-G1 | 6 | G1/8 | 5.5 | 24.6 | 19.9 | / | 14 | 17.2 |
| PRT06-G2 | 6 | G1/4 | 6 | 25.1 | 19.9 | 17 | 14 | 17.7 |
| PRT06-G3 | 6 | G3/8 | 7 | 26.1 | 19.9 | 21 | 17 | 23.1 |
| PRT06-G4 | 6 | G1/2 | 9 | 28.1 | 19.9 | 24 | 19 | 27.5 |
| PRT08-G1 | 8 | G1/8 | 5.5 | 25.2 | 22.9 | / | 14 | 19.6 |
| PRT08-G2 | 8 | G1/4 | 6 | 25.7 | 22.9 | 17 | 14 | 20.5 |
| PRT08-G3 | 8 | G3/8 | 7 | 26.7 | 22.9 | 21 | 17 | 25.6 |
| PRT08-G4 | 8 | G1/2 | 9 | 28.7 | 22.9 | 24 | 19 | 30.1 |
| PRT10-G1 | 10 | G1/8 | 5.5 | 28.7 | 27.2 | / | 17 | 29.9 |
| PRT10-G2 | 10 | G1/4 | 6 | 29 | 27.2 | / | 17 | 30.5 |
| PRT10-G3 | 10 | G3/8 | 7 | 30.2 | 27.2 | 21 | 17 | 34 |
| PRT10-G4 | 10 | G1/2 | 9 | 32.2 | 27.2 | 24 | 19 | 40.4 |
| PRT12-G1 | 12 | G1/8 | 5.5 | 30.5 | 29.2 | / | 19 | 37 |
| PRT12-G2 | 12 | G1/4 | 6 | 31 | 29.2 | / | 19 | 39.6 |
| PRT12-G3 | 12 | G3/8 | 7 | 32 | 29.2 | 21 | 19 | 42.8 |
| PRT12-G4 | 12 | G1/2 | 9 | 34 | 29.2 | 24 | 21 | 48.3 |
sylw os gwelwch yn dda ： Dyfynbrisiau a danfoniad eitemau nad ydynt yn stoc yn cael eu cyflenwi ar gais.Gall cyfluniadau a dimensiynau newid heb rybudd.
Ffitiadau Gwthio i Mewn Plastig
Nodweddion
- Yn syml, gosod a dadosod heb unrhyw offer.
- Mecanwaith cloi tiwb dur di-staen.
- Seliwr edau ar edafedd tapr, sêl wyneb O-ring ar edafedd G.
- NBR fel y deunydd selio safonol, mae deunyddiau eraill ar gael ar gais.
- Mae Nick plated yn safonol ar gyfer triniaeth wyneb bas, sicrhau gwrth-cyrydu a gwrth-halogi.
- Gellir ei hailddefnyddio - Gellir ei ymgynnull a'i ddadosod dro ar ôl tro.(argymell torri'r rhan o'r tiwb sydd wedi'i difrodi gan yr wyneb)
- Edefyn: BSPP, BSPT, CNPT (Cysylltwch â ni am arddulliau eraill)
Manyleb
| Sêl O-Ring | NBR (mae deunyddiau eraill ar gael ar gais) |
| Mecanwaith gafaelgar | Dur Di-staen |
| Amrediad Tymheredd | 32°F i 140°F |
| Pwysedd Uchaf | 150 PSI |
| Toll Gwactod | 29.5 Modfedd Hg |
| Cyfryngau | Aer Cywasgedig |
Nodyn: Dim ond fel canllaw i gymorth dylunio oedd y rhain.Dylid cynnal profion maes i ddod o hyd i'r gwerthoedd gwirioneddol ar gyfer eich cais.
Cyfarwyddiadau Gosod
 |  |
| Ffigur 1 | Ffigur 2 |
I gysylltu tiwb (gweler ffigur 1)
- Tiwbiau wedi'u torri'n sgwâr – uchafswm o ongl 15° a ganiateir. Argymhellir defnyddio torrwr tiwb (PTC).
- Gwiriwch a yw'r porthladd neu'r rhan baru yn lân ac yn rhydd o falurion.
- Mewnosodwch y tiwb i'r ffitiad nes ei fod yn gwaelodi. Gwthiwch ddwywaith i wirio bod y tiwb yn cael ei fewnosod heibio collet & O-Ring.
- Tynnwch diwb ymlaen i wirio ei fod wedi'i fewnosod yn llawn.
I ddatgysylltu tiwb (gweler ffigur 2)
- Yn syml, botwm datganiad i'r wasg, dal yn erbyn y corff, a thynnu tiwbiau allan o ffit.
