PY Gwryw Y Plastig Poly Gwthio Mewn Tiwb i Ffitiadau Connector Adapter Pibell
| MODEL | A | B | C | D | E | F | Pwysau(g) |
| PY04 | 4 | 10.5 | 32.3 | 10.5 | 3 | 5.6 | |
| PY06 | 6 | 12.9 | 39.4 | 13.5 | 3 | 8.5 | |
| PY08 | 8 | 14.3 | 41.8 | 15 | 3 | 10.8 | |
| PY10 | 10 | 17.6 | 49.5 | 18.5 | 4 | 19.3 | |
| PY12 | 12 | 20.7 | 54.1 | 20.5 | 4 | 26 | |
| PY14 | 14 | 22.5 | 57.6 | 23.5 | 5 | 30 | |
| Py16 | 16 | 24.2 | 58.5 | 25 | 5 | 33 |
| MODEL | A | A1 | B | D | E | E1 | F | Pwysau(g) |
| PY0604 | 6 | 4 | 51 | 11 | 3 | 6.4 | ||
| PY0804 | 8 | 4 | 41 | 12.5 | 3 | 8.7 | ||
| PY0806 | 8 | 6 | 41.5 | 13 | 3 | 9 | ||
| PY1006 | 10 | 6 | 48.5 | 14 | 4 | 13.4 | ||
| PY1008 | 10 | 8 | 49 | 14.5 | 4 | 13.6 | ||
| PY1208 | 12 | 8 | 64 | 17.5 | 4 | 19 | ||
| PY1210 | 12 | 10 | 65 | 18 | 4 | 21.2 |
| MODEL | A | B | C | D | E | F | H1(Hecs) | Pwysau(g) |
| PY04-M5 | 4 | M5*0.7c | 5 | 37.5 | 10.5 | 10 | 9.4 | |
| PY04-M6 | 4 | M6*1.1c | 6 | 38 | 10.5 | 10 | 9.4 | |
| PY04-01 | 4 | R1/8 | 7.5 | 40 | 10.5 | 10 | 9.6 | |
| PY04-02 | 4 | R1/4 | 9 | 41 | 10.5 | 14 | 13.7 | |
| PY04-03 | 4 | R3/7 | 10.5 | 42 | 10.5 | 17 | 17 | |
| PY06-M5 | 6 | M5*0.7c | 5 | 44.5 | 13 | 12 | 14.1 | |
| PY06-M6 | 6 | M6*1.1c | 6 | 45 | 13 | 12 | 14.1 | |
| PY06-01 | 6 | R1/8 | 7.5 | 46 | 13 | 12 | 14.5 | |
| PY06-02 | 6 | R1/4 | 9 | 47 | 13 | 14 | 17.3 | |
| PY06-03 | 6 | R3/7 | 10.5 | 49 | 13 | 17 | 22.3 | |
| PY06-04 | 6 | R1/2 | 12 | 50 | 13 | 21 | 30.3 | |
| PY08-01 | 8 | R1/8 | 7.5 | 49 | 14 | 14 | 18.5 | |
| PY08-02 | 8 | R1/4 | 9 | 50 | 14 | 14 | 19.3 | |
| PY08-03 | 8 | R3/7 | 10.5 | 52 | 14 | 17 | 24.4 | |
| PY08-04 | 8 | R1/2 | 12 | 53 | 14 | 21 | 32.1 | |
| PY10-01 | 10 | R1/8 | 7.5 | 55.5 | 18 | 17 | 28.6 | |
| PY10-02 | 10 | R1/4 | 9 | 57 | 18 | 17 | 30.2 | |
| PY10-03 | 10 | R3/7 | 10.5 | 58.5 | 18 | 17 | 33.5 | |
| PY10-04 | 10 | R1/2 | 12 | 60 | 18 | 21 | 40.6 | |
| PY12-01 | 12 | R1/8 | 7.5 | 59.5 | 20.5 | 19 | 39.7 | |
| PY12-02 | 12 | R1/4 | 9 | 61 | 20.5 | 19 | 42.2 | |
| PY12-03 | 12 | R3/7 | 10.5 | 62.5 | 20.5 | 19 | 44.1 | |
| PY12-04 | 12 | R1/2 | 12 | 64 | 20.5 | 21 | 49.5 |
Ychwanegu O-ring
| MODEL | A | B | C | D | E | F | H1(Hecs) | Pwysau(g) |
| PY04-G1 | 4 | G1/8 | 5.5 | 39 | 10.5 | 3 | 12 | 11.9 |
| PY04-G2 | 4 | G1/4 | 6 | 39.5 | 10.5 | 3 | 14 | 13.9 |
| PY04-G3 | 4 | G3/8 | 7 | 40.5 | 10.5 | 3 | 17 | 19 |
| PY06-G1 | 6 | G1/8 | 5.5 | 45 | 13 | 3 | 14 | 16.8 |
| PY06-G2 | 6 | G1/4 | 6 | 45.4 | 13 | 3 | 14 | 17.3 |
| PY06-G3 | 6 | G3/8 | 7 | 46.4 | 13 | 3 | 17 | 22.8 |
| PY06-G4 | 6 | G1/2 | 9 | 48.4 | 13 | 3 | 19 | 27.5 |
| PY08-G1 | 8 | G1/8 | 5.5 | 48 | 14 | 3 | 14 | 18.6 |
| PY08-G2 | 8 | G1/4 | 6 | 48.5 | 14 | 3 | 14 | 20.7 |
| PY08-G3 | 8 | G3/8 | 7 | 49.5 | 14 | 3 | 17 | 24.6 |
| PY08-G4 | 8 | G1/2 | 9 | 51.5 | 14 | 3 | 19 | 29 |
| PY10-G1 | 10 | G1/8 | 5.5 | 55 | 18 | 4 | 17 | 28.7 |
| PY10-G2 | 10 | G1/4 | 6 | 55.5 | 18 | 4 | 17 | 29.1 |
| PY10-G3 | 10 | G3/8 | 7 | 56.7 | 18 | 4 | 17 | 33.6 |
| PY10-G4 | 10 | G1/2 | 9 | 58.7 | 18 | 4 | 19 | 38.9 |
| PY12-G1 | 12 | G1/8 | 5.5 | 59 | 20.5 | 4 | 19 | 38 |
| PY12-G2 | 12 | G1/4 | 6 | 59.5 | 20.5 | 4 | 19 | 40.8 |
| PY12-G3 | 12 | G3/8 | 7 | 60.5 | 20.5 | 4 | 21 | 44.4 |
| PY12-G4 | 12 | G1/2 | 9 | 62.5 | 20.5 | 4 | 21 | 49.8 |
| PY14-G3 | 14 | G3/8 | 7 | 66 | 24 | 5 | 22 | 61.9 |
| PY14-G4 | 14 | G1/2 | 9 | 66.5 | 24 | 5 | 24 | 65.9 |
| PY16-G3 | 16 | G3/8 | 7 | 65.5 | 25 | 5 | 24 | 74.5 |
| PY16-G4 | 16 | G1/2 | 9 | 66 | 25 | 5 | 24 | 66.1 |
sylw os gwelwch yn dda ： Dyfynbrisiau a danfoniad eitemau nad ydynt yn stoc yn cael eu cyflenwi ar gais.Gall cyfluniadau a dimensiynau newid heb rybudd.
Ffitiadau Gwthio i Mewn Plastig
Nodweddion
- Yn syml, gosod a dadosod heb unrhyw offer.
- Mecanwaith cloi tiwb dur di-staen.
- Seliwr edau ar edafedd tapr, sêl wyneb O-ring ar edafedd G.
- NBR fel y deunydd selio safonol, mae deunyddiau eraill ar gael ar gais.
- Mae Nick plated yn safonol ar gyfer triniaeth wyneb bas, sicrhau gwrth-cyrydu a gwrth-halogi.
- Gellir ei hailddefnyddio - Gellir ei ymgynnull a'i ddadosod dro ar ôl tro.(argymell torri'r rhan o'r tiwb sydd wedi'i difrodi gan yr wyneb)
- Edefyn: BSPP, BSPT, CNPT (Cysylltwch â ni am arddulliau eraill)
Manyleb
| Sêl O-Ring | NBR (mae deunyddiau eraill ar gael ar gais) |
| Mecanwaith gafaelgar | Dur Di-staen |
| Amrediad Tymheredd | 32°F i 140°F |
| Pwysedd Uchaf | 150 PSI |
| Toll Gwactod | 29.5 Modfedd Hg |
| Cyfryngau | Aer Cywasgedig |
Nodyn: Dim ond fel canllaw i gymorth dylunio oedd y rhain.Dylid cynnal profion maes i ddod o hyd i'r gwerthoedd gwirioneddol ar gyfer eich cais.
Cyfarwyddiadau Gosod
 |  |
| Ffigur 1 | Ffigur 2 |
I gysylltu tiwb (gweler ffigur 1)
- Tiwbiau wedi'u torri'n sgwâr – uchafswm o ongl 15° a ganiateir. Argymhellir defnyddio torrwr tiwb (PTC).
- Gwiriwch a yw'r porthladd neu'r rhan baru yn lân ac yn rhydd o falurion.
- Mewnosodwch y tiwb i'r ffitiad nes ei fod yn gwaelodi. Gwthiwch ddwywaith i wirio bod y tiwb yn cael ei fewnosod heibio collet & O-Ring.
- Tynnwch diwb ymlaen i wirio ei fod wedi'i fewnosod yn llawn.
I ddatgysylltu tiwb (gweler ffigur 2)
- Yn syml, botwm datganiad i'r wasg, dal yn erbyn y corff, a thynnu tiwbiau allan o ffit.
